Yangzhou Tongyang Chemical Equipment Co., Ltd.
sunjiawei@yzcheequipt.com
86--18556139427
Bubble tower is a device for water treatment, mainly used to remove pollutants such as suspended matter, particulate matter and organic matter from the water. Its function is to inject air into the water to create bubbles, so that the pollutants in the water come into contact with the bubbles, so that the pollutants float to the surface of the water, forming bubbles and eventually being removed. Bubble tower is usually used in industrial wastewater treatment, sewage treatment, drinking water purification and other fields.
Storage tanks are containers that hold liquids, compressed gases (gas tank; or in U.S.A "pressure vessel", which is not typically labeled or regulated as a storage tank) or mediums used for the short- or long-term storage of heat or cold. The term can be used for reservoirs, and for manufactured containers. High pressure storage tank and large storage tank are common equipment for storing liquids or gases. Their main difference lies in their design and use. High pressure storage tank are...
The operation process of stable continuous evaporative crystallizer can be divided into countercurrent method, downstream method, cross flow method, and flat flow method. In addition to these four processes, other processes can also be arranged according to production conditions. For example, sometimes, in most evaporation processes, after introducing secondary steam and using it as heating steam, not every effect occurs. On the contrary, a portion of the secondary steam is used to preheat the...
The industrial material reactor is composed of kettle body, kettle cover, jacket, agitator, transmission device, shaft seal device, support and so on. The mixing form is generally anchor type, slurry type, turbine type, propulsion type or frame type, etc. When the height of the stirring device is relatively large, multi-layer stirring blade can be used, or any selection can be made according to the requirements of the user. And a jacket is arranged outside the kettle wall, or a heat replacement...
The hydrogenation reaction kettle can be divided into two categories: One is the traditional stirred reactor. Gas in the upper space of the vessel can not be circulated in the liquid phase, because of the miscibility and density difference of the gas and liquid. The unreacted gas accumulates in the upper space of the reactor in the reactor, which seriously affects the reaction rate.The other is the reaction kettle in which the gas is circulated in the liquid phase. Gas-liquid reaction is a kind...
High-Performance Material Reactor consists of a set of special components to achieve transmission requirements and shear deformation, high gas internal circulation and turbulence.When motor rotates by driving internal hollow agitator the centrifugal force produced by the circular motion of the fluid nearby under the action of the impeller makes the agitator self-priming, when negative pressure zone is formed, inner part will connected to gas through air axis,Thus, the gas on liquid surface is...
Reactor Introduction: 1. Types: tubular reactor, tank reactor, solid particle bed reactor, tower reactor, jet reactor and other atypical reactor. 2. Concrete products: reactor, reaction kettle, autoclave, high-pressure kettle, high-pressure autoclave, super autoclave, synthetic tower, decomposition pan, vulcanizer, decomposition tower, polymerization kettle, transform furnace, cooking pot, steamed ball, gas furnace. 3. Materials: carbon steel, low-alloy steel, stainless steel and non-ferrous...
Spiral board plate heat exchanger is a kind of high efficiency heat exchanger equipment, which is suitable for vapor to vapor, vapor to liquid, liquid to liquid and liquid to liquid heat transfer. It is suitable for chemical, petroleum, solvent, medicine, food, light industry, textile, metallurgy, steel rolling, coking and other industries. According to the structure, it can be divided into non detachable (type I) spiral plate heat exchanger and detachable (type II, type III) spiral plate heat...
Spiral plate heat exchanger Nominal pressure PG is 0.6, 1.0, 1.6MPa. The allowable working temperature of carbon steel spiral plate heat exchanger is -20°C~250°C; Stainless steel is -20°C~320°C. When the equipment is selected, the fluid in the equipment channel should reach the turbulent state (general liquid flow rate) of 1m/ SEC through the appropriate process calculation; Gas velocity > 10 m/SEC. Equipment has vertical, horizontal, hanging three types of installation. For steam...
Spirotal heat exchanger equipment Usage & Applications: A stainless steel spiral heat exchanger is a high-efficiency heat exchanger suitable for steam-steam, steam-liquid and liquid-liquid heat transfer. It adapts for chemical, petroleum, pharmacy, food, light-industry, textile, metallurgy, steel rolling and coking industry etc. According to the structure, it can be divided into un-detachable (Model I) and detachable (Model III) . Spiral board plate heat exchanger Nominal pressure PG is...
High temperature spiral plate heat exchanger is a kind of high efficiency heat exchanger equipment, which is suitable for vapor to vapor, vapor to liquid, liquid to liquid and liquid to liquid heat transfer. It is suitable for chemical, petroleum, solvent, medicine, food, light industry, textile, metallurgy, steel rolling, coking and other industries. According to the structure, it can be divided into non detachable (type I) spiral plate heat exchanger and detachable (type II, type III) spiral...
Spiral plate heat exchanger Nominal pressure PG is 0.6, 1.0, 1.6MPa. The allowable working temperature of carbon steel is -20°C~250°C; Stainless steel is -20°C~320°C. When the equipment is selected, the fluid in the equipment channel should reach the turbulent state (general liquid flow rate) of 1m/ SEC through the appropriate process calculation; Gas velocity > 10 m/SEC. Equipment has vertical, horizontal, hanging three types of installation. For steam condensation can only be cubic....
Main Features: 1) Material: stainless steel and/or carbon steel 2) Heat exchanger area: 1 - 250sqm 3) Type: non-detachable or detachable ,horizontal or vertical type 4)Used for steam to steam, liquid to liquid, and steam to liquid heat transferring and exchanging The spiral heat exchanger (SHE) is a high-efficiency heat exchanger used for heat exchanging in factories of ethanol(alcohol),chemical, petroleum, pharmacy, food, light-industry, textile, metallurgy, steel rolling and coking industry...
Large Storage Tank are containers that hold liquids, compressed gases (gas tank; or in U.S.A "pressure vessel", which is not typically labeled or regulated as a storage tank) or mediums used for the short- or long-term storage of heat or cold. The term can be used for reservoirs, and for manufactured containers. A high pressure storage tank is a container used to store high-pressure gases or liquids. It is usually made of steel and can withstand high pressures to ensure that the stored gas or...
Extraction tower configuration and Characteristics 1. The tower, the intermediate section of the extraction tower, is an upright cylinder. It can also be made of stainless steel or high borosilicate glass according to the size of the extraction. 2. the internal components and pipes of the extraction tower are made of stainless steel. 3. the extraction device is easy to clean and suitable for organic mixtures with high viscosity. Stainless steel extraction tower introduction: Extraction tower...
Chemical raw storage tank can be divided into the following categories based on their purpose and characteristics: 1. Storage tank: mainly used for storing liquid chemical raw materials, such as petroleum, chemicals, alcohol, ammonia, etc. Storage tanks are generally made of materials such as steel, fiberglass, and concrete, which have the characteristics of anti-corrosion, explosion-proof, and leak proof. 2. Mixing tank: mainly used for chemical raw materials in mixing, stirring, reaction and...
Our services We can provide you with high quality products. Quality service. And accept customer according to your request. If you have any questions. please tell me. I will fix it for you as soon as possible.Warm-hearting service to help you find suitable stainless steel storage tank. Lined Anticorrosive Storage Tank Advantages : All these tanks are extremely rugged in state and offer high level of performance with accuracy. Product process 1). cutting materials for preparing oil tanks...
Lined Anticorrosive Storage Tank Product process 1). cutting materials for preparing oil tanks manufacture 2). rolling machines for circling 3). welding and NDT(non-defection test) inspection 4). re-circling after welding 5). outer vessel’s abrasive blasting and anti corrosive painting for outside surface 6). pipe connecting and assembly of inner vessel and outer vessel 7). valves installation 8). perlite filling 9). vacuum-pumping 10). final painting and ready for shipment Our services We can...
Finned tubes are the main components of heat exchangers. They are a series of tubes where fins have been added on the outside to increase the contact area with the outside fluid, to exchange heat and between the fluid inside the tube and the fluid outside the tube. Finned tube heat exchanger are known for maximizing heat transfer surface area, by design. Finned tube heat exchangers have tubes with extended outer surface area or fins to enhance the heat transfer rate from the additional area of...
Float valve tray and metal sieve tray are commonly used tray types in chemical equipment, and their functions are as follows: Float valve tray is a type of tray with a floating valve that allows fluid to flow between different trays, thereby increasing the surface area of the reactor or separation tower. Float valve trays are suitable for gas-liquid two-phase reactions or separation processes, and can effectively prevent liquid backflow and gas bubble plugging. A metal sieve tray is a type of...
Float valve tray and metal sieve tray are commonly used fillers in chemical equipment, and their main function is to increase the surface area of chemical reactors or separation towers to improve reaction or separation efficiency. 1. Adjustable float valve tray: It can be used in tower equipment in industries such as chemical, petroleum, and pharmaceutical industries. Its main function is to control the liquid level and airflow speed inside the tower and improve separation efficiency. 2....
Stainless steel reactor surface anti-corrosion treatment stainless steel due to its special metallographic structure and surface passivation film, it is difficult to chemically react with the medium under normal conditions, but it can not be...
Introduction to rolling surface processing of stainless steel tubes Stainless steel tube is an economic section of steel, is an important product in the steel industry, can be widely used in life decoration and industry, many people on the market...
High-carbon steel refers to w (C) higher than 0.6% of carbon steel, which has a greater tendency to harden than medium-carbon steel, and the formation of high-carbon martensite, more sensitive to the formation of cold cracks. At the same time, the...
Austenitic stainless steel by solid solution treatment to soften, generally heated stainless steel to 950 ~ 1150 ℃, holding a period of time, so that carbide and various alloying elements fully and uniformly dissolved in austenite, and then quickly...
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
