Yangzhou Tongyang Chemical Equipment Co., Ltd.
sunjiawei@yzcheequipt.com
86--18556139427
The reactor is a comprehensive reaction vessel. According to the reactionof reactor`s function and structure, it operate automatically once it has been previously set up, important parameters such as temperature, pressure, mechanical control (stirring, blowing, etc.) and reactant / product concentration were strictly controlled. Reactors are widely used in petroleum, chemical, rubber, pesticide, dyestuff, medicine, food and various research or experimental projects, It is used to complete hydrolysis, neutralization, crystallization, distillation, evaporation, storage, hydrogenation, alkylation, polymerization, condensation, heating, mixing and constant temperature reaction.
The hydrogenation reaction kettle can be divided into two categories: One is the traditional stirred reactor. Gas in the upper space of the vessel can not be circulated in the liquid phase, because of the miscibility and density difference of the gas and liquid. The unreacted gas accumulates in the upper space of the reactor in the reactor, which seriously affects the reaction rate.The other is the reaction kettle in which the gas is circulated in the liquid phase. Gas-liquid reaction is a kind...
High-Performance Material Reactor consists of a set of special components to achieve transmission requirements and shear deformation, high gas internal circulation and turbulence.When motor rotates by driving internal hollow agitator the centrifugal force produced by the circular motion of the fluid nearby under the action of the impeller makes the agitator self-priming, when negative pressure zone is formed, inner part will connected to gas through air axis,Thus, the gas on liquid surface is...
There are two kinds of high pressure reactor technologies: one is adiabatic high pressure stirred reactor, and the other is tubular reactor with cooling medium jacket. The residence time of high pressure reactor is very short, which can be switched quickly between different reactor grades. The obtained polymer is in molten state. Due to the fresh feed stream and catalyst injection, both reactor technologies are cross flow operation. The polymer concentration increases continuously with the...
The buffer tank is an important auxiliary equipment of the reciprocating pump.chemical storage equipment It is used to reduce the unevenness of the flow in the pipeline. Non-Metallic storage tanks storage equipments is divided into two types: suction buffer tank and discharge buffer tank. The function of the suction buffer tank is to reduce the unevenness of the suction pipeline flow, reduce the inertia loss, and improve the suction performance of the pump. The function of the discharge buffer...
Industrial material reactor Anti-corrosion material reactor are most widely used in chemical plants, paint manufacturing, pharmaceutical industries, etc. These reactors are carefully fabricated to avoid any defects and any chemical reaction of surface materials, inlet and outlet flow, heating rate (heating rate) and cooling rate (cooling rate). High-performance material reactor are used for solid dissolution, product mixing, chemical reaction, batch distillation, crystallization, liquid/liquid...
The industrial material reactor is composed of kettle body, kettle cover, jacket, agitator, transmission device, shaft seal device, support and so on. The mixing form is generally anchor type, slurry type, turbine type, propulsion type or frame type, etc. When the height of the stirring device is relatively large, multi-layer stirring blade can be used, or any selection can be made according to the requirements of the user. And a jacket is arranged outside the kettle wall, or a heat replacement...
The hydrogenation reaction kettle can be divided into two categories: One is the traditional stirred reactor. Gas in the upper space of the vessel can not be circulated in the liquid phase, because of the miscibility and density difference of the gas and liquid. The unreacted gas accumulates in the upper space of the reactor in the reactor, which seriously affects the reaction rate.The other is the reaction kettle in which the gas is circulated in the liquid phase. Gas-liquid reaction is a kind...
High-Performance Material Reactor consists of a set of special components to achieve transmission requirements and shear deformation, high gas internal circulation and turbulence.When motor rotates by driving internal hollow agitator the centrifugal force produced by the circular motion of the fluid nearby under the action of the impeller makes the agitator self-priming, when negative pressure zone is formed, inner part will connected to gas through air axis,Thus, the gas on liquid surface is...
airtight pressure filter washing and drying machine can be divided into four processes 1． Feeding filtration: under the action of the pump, the material to be separated enters the machine, and through the pressure of the pump, the initial filtration begins. After the feeding, the compressed gas is passed through and filtered again under the pressure of the compressed air to realize the solid-liquid separation of the materials to be separated. Filter medium can be selected according to different...
There are two kinds of high pressure reactor technologies: one is adiabatic high pressure stirred reactor, and the other is tubular reactor with cooling medium jacket. The residence time of high pressure reactor is very short, which can be switched quickly between different reactor grades. The obtained polymer is in molten state. Due to the fresh feed stream and catalyst injection, both reactor technologies are cross flow operation. The polymer concentration increases continuously with the...
Shell of stirred reactor kettle: The shell is composed of a round cylinder, an upper cover and a lower head. There are two ways to connect the upper cover and the cylinder body, one is the lid and the cylinder body directly welded to form a whole; Another form is to consider convenient disassembly, available flange connection. The upper cover is provided with manhole, hand hole and process takeover. stirred device of stirred reactor: In the reaction kettle, in order to speed up the reaction...
The buffer tank is an important auxiliary equipment of the reciprocating pump.chemical storage equipment It is used to reduce the unevenness of the flow in the pipeline. Non-Metallic storage tanks storage equipments is divided into two types: suction buffer tank and discharge buffer tank. The function of the suction buffer tank is to reduce the unevenness of the suction pipeline flow, reduce the inertia loss, and improve the suction performance of the pump. The function of the discharge buffer...
Industrial material reactor Anti-corrosion material reactor are most widely used in chemical plants, paint manufacturing, pharmaceutical industries, etc. These reactors are carefully fabricated to avoid any defects and any chemical reaction of surface materials, inlet and outlet flow, heating rate (heating rate) and cooling rate (cooling rate). High-performance material reactor are used for solid dissolution, product mixing, chemical reaction, batch distillation, crystallization, liquid/liquid...
The industrial material reactor is composed of kettle body, kettle cover, jacket, agitator, transmission device, shaft seal device, support and so on. The mixing form is generally anchor type, slurry type, turbine type, propulsion type or frame type, etc. When the height of the stirring device is relatively large, multi-layer stirring blade can be used, or any selection can be made according to the requirements of the user. And a jacket is arranged outside the kettle wall, or a heat replacement...
The hydrogenation reaction kettle can be divided into two categories: One is the traditional stirred reactor. Gas in the upper space of the vessel can not be circulated in the liquid phase, because of the miscibility and density difference of the gas and liquid. The unreacted gas accumulates in the upper space of the reactor in the reactor, which seriously affects the reaction rate.The other is the reaction kettle in which the gas is circulated in the liquid phase. Gas-liquid reaction is a kind...
High-Performance Material Reactor consists of a set of special components to achieve transmission requirements and shear deformation, high gas internal circulation and turbulence.When motor rotates by driving internal hollow agitator the centrifugal force produced by the circular motion of the fluid nearby under the action of the impeller makes the agitator self-priming, when negative pressure zone is formed, inner part will connected to gas through air axis,Thus, the gas on liquid surface is...
There are two kinds of high pressure reactor technologies: one is adiabatic high pressure stirred reactor, and the other is tubular reactor with cooling medium jacket. The residence time of high pressure reactor is very short, which can be switched quickly between different reactor grades. The obtained polymer is in molten state. Due to the fresh feed stream and catalyst injection, both reactor technologies are cross flow operation. The polymer concentration increases continuously with the...
The buffer tank is an important auxiliary equipment of the reciprocating pump.chemical storage equipment It is used to reduce the unevenness of the flow in the pipeline. Non-Metallic storage tanks storage equipments is divided into two types: suction buffer tank and discharge buffer tank. The function of the suction buffer tank is to reduce the unevenness of the suction pipeline flow, reduce the inertia loss, and improve the suction performance of the pump. The function of the discharge buffer...
Industrial material reactor Anti-corrosion material reactor are most widely used in chemical plants, paint manufacturing, pharmaceutical industries, etc. These reactors are carefully fabricated to avoid any defects and any chemical reaction of surface materials, inlet and outlet flow, heating rate (heating rate) and cooling rate (cooling rate). High-performance material reactor are used for solid dissolution, product mixing, chemical reaction, batch distillation, crystallization, liquid/liquid...
The hydrogenation reaction kettle can be divided into two categories: One is the traditional stirred reactor. Gas in the upper space of the vessel can not be circulated in the liquid phase, because of the miscibility and density difference of the gas and liquid. The unreacted gas accumulates in the upper space of the reactor in the reactor, which seriously affects the reaction rate.The other is the reaction kettle in which the gas is circulated in the liquid phase. Gas-liquid reaction is a kind...
Abstract: The liquefaction of gases in industrial installations, as well as the production, storage, and application of liquefied gases, are becoming increasingly widespread. The development of low-temperature technology has promoted the application...
Manufacturing process The manufacturing process of pressure vessels includes preparation of raw materials, scribing, undercutting, bending, forming, edge processing, assembly, welding, inspection, etc. Preparation of raw materials Before scribing...
1, pressure vessel operators must hold the "certificate" before they can operate independently. Operators should be familiar with the technical characteristics, structure, process flow, process parameters, accidents that may occur, and preventive...
1. Check whether the equipment is damaged after opening the package. Install the equipment according to the structure of the equipment according to the model. The parts are checked according to the packing list to see if there are any missing parts....
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
