Drying Tower Equipment

Spiral plate heat exchanger Nominal pressure PG is 0.6, 1.0, 1.6MPa. The allowable working temperature of carbon steel spiral plate heat exchanger is -20°C~250°C; Stainless steel is -20°C~320°C. When the equipment is selected, the fluid in the equipment channel should reach the turbulent state (general liquid flow rate) of 1m/ SEC through the appropriate process calculation; Gas velocity > 10 m/SEC. Equipment has vertical, horizontal, hanging three types of installation. For steam...

Spirotal heat exchanger equipment Usage & Applications: A stainless steel spiral heat exchanger is a high-efficiency heat exchanger suitable for steam-steam, steam-liquid and liquid-liquid heat transfer. It adapts for chemical, petroleum, pharmacy, food, light-industry, textile, metallurgy, steel rolling and coking industry etc. According to the structure, it can be divided into un-detachable (Model I) and detachable (Model III) . Spiral board plate heat exchanger Nominal pressure PG is...

Spiral plate heat exchanger Nominal pressure PG is 0.6, 1.0, 1.6MPa. The allowable working temperature of carbon steel is -20°C~250°C; Stainless steel is -20°C~320°C. When the equipment is selected, the fluid in the equipment channel should reach the turbulent state (general liquid flow rate) of 1m/ SEC through the appropriate process calculation; Gas velocity > 10 m/SEC. Equipment has vertical, horizontal, hanging three types of installation. For steam condensation can only be cubic....

Its structure is roughly the same as film-lift evaporator, liquid is added from top. A liquid distribution device is installed at the top of each tube, so that the liquid can be uniformly received.The secondary steam and the concentrated liquid generally flow together, and the material liquid flows along the pipe wall in a film form due to the action of the secondary steam. The liquid film flow uses gravity instead of overcoming gravity and thus vaporizes the solution with greater viscosity....

Introduction to extraction tower machine: Stainless steel extraction tower is a mechanically stirred industrial extraction tower equipment, consisting of an upper settling chamber, an emulsification chamber, and a lower settling chamber. The emulsification chamber is cylindrical and divided into several extraction chambers through a static annular baffle. There is a fixed rotating disc between the two static annular baffles that rotate along the shaft. During operation, the heavy phase (aqueous...

Introduction of Industrial extraction tower equipment: Extraction tower machine is a kind of tower extraction equipment of mechanical stirring, it is composed by upper settling chamber, emulsion chamber and bottom settling chamber. the emulsion chamber is cylinder type, and is divided into several extraction chambers by static ring baffle, there is a fixed turnplate between two static ring baffles, and rotating with shaft together. When work, heavy phase(aqueous)and light phase(organic phase)...

Extraction tower configuration and Characteristics 1. The tower, the intermediate section of the extraction tower, is an upright cylinder. It can also be made of stainless steel or high borosilicate glass according to the size of the extraction. 2. the internal components and pipes of the extraction tower are made of stainless steel. 3. the extraction device is easy to clean and suitable for organic mixtures with high viscosity. Stainless steel extraction tower introduction: Extraction tower...

High efficient energy saving distillation tower is an equipment that can perform separation, purification, and other process operations in industries such as chemical, petroleum, pharmaceutical, and food. It has the characteristics of high separation efficiency, low energy consumption, and stable operation. Based on different classification methods, the following are several of them: 1. Classification of operating methods: high efficient distillation tower can be classified based on their...

Industrial distillation tower are large-scale chemical equipment mainly used for large-scale separation and purification processes in industrial production. It is usually composed of multiple distillation columns, capable of handling a large amount of mixture, and capable of continuous operation to improve production efficiency. Industrial distillation towers are widely used in industries such as petrochemical, pharmaceutical, food, and chemical fiber, and are one of the indispensable equipment...

Energy saving distillation tower is a type of equipment that can perform separation, purification, and other process operations in industries such as chemical, petroleum, pharmaceutical, and food. It has the characteristics of high separation efficiency, low energy consumption, and stable operation. According to their different structures and working principles, high-efficiency and energy-saving distillation towers can be divided into the following categories: 1. Plate distillation tower:...

Features of the absorption tower equipment: 1. Simple process, low cost, low running cost, easy installation. 2. Wide application range, high purification efficiency, low equipment resistance, small footprint 3. Long service life, convenient maintenance, simple operation and management, no special technical requirements. 4. According to different waste gases with different agents, the wet process is adopted to purify a variety of toxic and harmful waste gases 5. The desulfurization effect is...

Absorption tower equipment using in coal-fired boiler, furnace, smelting, casting and other governance, flue gas desulfurization technology is mature, reliable and it has convenient installation, maintenance, operation and management, with low operating cost, and high desulfurization efficiency. Features of the absorption tower machinery equipment: 1. Simple process, low cost, low running cost, easy installation. 2. Wide application range, high purification efficiency, low equipment resistance,...

Absorption tower equipment using in coal-fired boiler, furnace, smelting, casting and other governance, flue gas desulfurization technology is mature, reliable and it has convenient installation, maintenance, operation and management, with low operating cost, and high desulfurization efficiency. Features of the absorption tower machinery equipment : 1. Simple process, low cost, low running cost, easy installation. 2. Wide application range, high purification efficiency, low equipment...

Powder making drying tower suitable for powder, particle products from materials, such as,solution, emulsion, SC and pumpable paste states material. For this reason, when the particle size and distribution of the final product, their residual water contents, the stacking density and particle shape must meet the precision standard,Drying tower equipment is one of the most desired processes. High efficiency drying tower is a drying equipment with the characteristics of high efficiency, energy...

Drying tower equipment is a commonly used drying equipment, whose main function is to dry materials with high humidity through heating, ventilation, and other methods, in order to reduce humidity and improve quality. According to different drying principles and application fields, drying tower equipment can be divided into the following types: 1. Airflow drying tower: mainly used for drying granular and powdered materials, completing the drying process through the flow of hot air. 2. Rotary...

High efficiency drying tower principle： After filtering and heating, the air enters into air distributor on top of the Drying Equipment. The hot air enters into the drying tower spiral form and uniformly. By .passing through high-speed centrifugal atomizer on top of tower, the material liquid will rotate and be sprayed into the extremely fine mist liquid beads. Through the very short time of contacting with heating air, the material can be dried into final products. The final products will be...

Industrial washing tower is a device used to remove pollutants from the air, usually used for industrial waste gas treatment. It is a vertically installed tower like device filled with adsorption materials such as activated carbon and molecular sieve. The exhaust gas passes through the packing layer inside the tower and comes into contact with the adsorption material to remove pollutants. Industrial washing towe, low energy washing tower and spray washing tower are three common industrial waste...

Industrial washing tower is a device used to remove pollutants from the air, usually used in industrial waste gas treatment. It is a kind of vertically mounted tower equipment, filled with adsorption materials, such as activated carbon, molecular sieve, waste gas through the tower body packing layer, and adsorption material contact, so as to remove pollutants. 1.The efficiency of dust removal and desulfurization is high and the efficiency of desulfurization can reach 85% when using alkaline...

Low energy washing tower is a type of industrial waste gas treatment equipment with low energy consumption, usually using wet washing technology. It adsorbs pollutants from exhaust gas into water through spraying water mist and purifies them through a water circulation system. Compared to traditional washing towers, low energy consumption washing towers have greater advantages in energy consumption, operating costs, and other aspects. 1. Atmospheric low energy consumption washing tower:...

Non-metallic storage tanks equipment refers to containers used for storing liquids or gases, whose main materials are not metal, but plastic, fiberglass, ceramics, and other materials. These storage tank equipment are used in chemical, pharmaceutical, food, pesticide, etc. Non-Metallic Storage Tanks 1.Working medium: Liquid oxygen,liquid argon, Liquid Nitrogen, LNG. 2. Size: As your requirement: 5m3,10m3,15m3......100m3. 3. Standard: As your requirement :GB ASME CE CU-TR INMETRO etc. 4. We can...