Yangzhou Tongyang Chemical Equipment Co., Ltd.
sunjiawei@yzcheequipt.com
86--18556139427
The reactor is a comprehensive reaction vessel. According to the reactionof reactor`s function and structure, it operate automatically once it has been previously set up, important parameters such as temperature, pressure, mechanical control (stirring, blowing, etc.) and reactant / product concentration were strictly controlled. Reactors are widely used in petroleum, chemical, rubber, pesticide, dyestuff, medicine, food and various research or experimental projects, It is used to complete hydrolysis, neutralization, crystallization, distillation, evaporation, storage, hydrogenation, alkylation, polymerization, condensation, heating, mixing and constant temperature reaction.
Product Usage: Pharmaceutical Crystallization Kettle Forced circulation evaporative crystallizer is a continuous crystallizer with crystal mud circulation. During operation, the feed liquid is fed from the bottom of the circulation pipe. After mixing with the crystallization slurry leaving the bottom of the crystallization chamber, it is pumped to the heating chamber. When the crystal paste is heated in the heating chamber (usually 2~6), no evaporation will occur. The hot crystalline paste...
Stable continuous evaporative crystallizer product features： 1. this equipment is mainly for targeted materials evaporation concentrate, And turn final product into a certain size of solid crystal. 2. When liquid material pass through circulation pump it heats up and direct into evaporation separator, it has a better result in vapor liquid separation. 3. Compact structure uses less area occupancy, stable performance etc 4. Easy to operate, easy maintenance. 5. It has sufficient mechanical...
The purpose of energy saving crystallization evaporator is to use secondary steam in evaporation process to save steam consumption to improve economic efficiency. The following chart is the amount of heating steam consumed by per kilogram of water, in which the actual consumption includes various heat losses during evaporation, its value changes slightly with different evaporator and evaporation process. Stable continuous evaporative crystallizer Product features： 1. this equipment is mainly...
Founded in 1990, TongYang is a professional company specializing in developing and manufacturing chemical machinery and equipment for customers ,It has manufacturing license of grade A2 (the third type of pressure vessel) issued by state general administration of quality supervision, inspection and quarantine, license Key: :TS2210D94-2015. Tongyang has always been committed to the research and development, production, application of chemical machinery and equipment in fine chemical,...
The hydrogenation reaction kettle can be divided into two categories: One is the traditional stirred reactor. Gas in the upper space of the vessel can not be circulated in the liquid phase, because of the miscibility and density difference of the gas and liquid. The unreacted gas accumulates in the upper space of the reactor in the reactor, which seriously affects the reaction rate.The other is the reaction kettle in which the gas is circulated in the liquid phase. Gas-liquid reaction is a kind...
High-Performance Material Reactor consists of a set of special components to achieve transmission requirements and shear deformation, high gas internal circulation and turbulence.When motor rotates by driving internal hollow agitator the centrifugal force produced by the circular motion of the fluid nearby under the action of the impeller makes the agitator self-priming, when negative pressure zone is formed, inner part will connected to gas through air axis,Thus, the gas on liquid surface is...
U-tube heat exchanger Product Advantages ● Experienced sales and professional after-sales group can provide 24hours consulting service. ● Long-term relationship with one more than experienced factory for providing high-level man ufacturing standard. ● High quality supplier for assuring the good performance of motors, fans,condenser heat exchanger, EX-pumps ,valves and ect. ● Competitive Price , Flexible Modular Design, Experience on running projects. From Engineering design, High-quality...
Spiral plate heat exchanger Nominal pressure PG is 0.6, 1.0, 1.6MPa. The allowable working temperature of carbon steel spiral plate heat exchanger is -20°C~250°C; Stainless steel is -20°C~320°C. When the equipment is selected, the fluid in the equipment channel should reach the turbulent state (general liquid flow rate) of 1m/ SEC through the appropriate process calculation; Gas velocity > 10 m/SEC. Equipment has vertical, horizontal, hanging three types of installation. For steam...
Spirotal heat exchanger equipment Usage & Applications: A stainless steel spiral heat exchanger is a high-efficiency heat exchanger suitable for steam-steam, steam-liquid and liquid-liquid heat transfer. It adapts for chemical, petroleum, pharmacy, food, light-industry, textile, metallurgy, steel rolling and coking industry etc. According to the structure, it can be divided into un-detachable (Model I) and detachable (Model III) . Spiral board plate heat exchanger Nominal pressure PG is...
High temperature spiral plate heat exchanger is a kind of high efficiency heat exchanger equipment, which is suitable for vapor to vapor, vapor to liquid, liquid to liquid and liquid to liquid heat transfer. It is suitable for chemical, petroleum, solvent, medicine, food, light industry, textile, metallurgy, steel rolling, coking and other industries. According to the structure, it can be divided into non detachable (type I) spiral plate heat exchanger and detachable (type II, type III) spiral...
Spiral plate heat exchanger Nominal pressure PG is 0.6, 1.0, 1.6MPa. The allowable working temperature of carbon steel is -20°C~250°C; Stainless steel is -20°C~320°C. When the equipment is selected, the fluid in the equipment channel should reach the turbulent state (general liquid flow rate) of 1m/ SEC through the appropriate process calculation; Gas velocity > 10 m/SEC. Equipment has vertical, horizontal, hanging three types of installation. For steam condensation can only be cubic....
storage tanks are containers that hold liquids, compressed gases (gas tank; or in U.S.A "pressure vessel", which is not typically labeled or regulated as a storage tank) or mediums used for the short- or long-term storage of heat or cold. The term can be used for reservoirs, and for manufactured containers. Large storage tank are usually used to store large amounts of liquids, such as petroleum, chemicals, food, etc. Their design and manufacturing need to take into account the physical and...
Standard evaporator Features ● Large concentration ratio, forced circulation type, make the viscous liquid easily flow and evaporate. ● Evaporator is forcedly circulated to heat evenly in the tube to prevent "dry wall" phenomenon. ● The main disadvantage is that the pump has a large flow and relatively high power consumption. Evaporation system belongs to the natural circulation evaporator, which is composed of heating chamber and evaporation chamberheating tube isΦ25-Φ75 wide and 0.6-2 meters...
Its structure is roughly the same as film-lift evaporator, liquid is added from top. A liquid distribution device is installed at the top of each tube, so that the liquid can be uniformly received.The secondary steam and the concentrated liquid generally flow together, and the material liquid flows along the pipe wall in a film form due to the action of the secondary steam. The liquid film flow uses gravity instead of overcoming gravity and thus vaporizes the solution with greater viscosity....
Falling film evaporation system application: Our falling film evaporator (FFE) is a specific type of vertically oriented shell and tube (S&T) heat exchanger that is used to separate two or more substances with different boiling point temperatures. Working Principle: In falling film evaporators, the liquid product usually enters the evaporator at the head of the evaporator.tube wall where it flows downwards at boiling temperature and is partially evaporated. In most cases, steam is used for...
External heating evaporator have the advantages of simple manufacturing and convenient maintenance, making them one of the most widely used evaporators and the most typical type of evaporator in circulation evaporators. External heating circulating evaporator can be divided into new Circulation external heating evaporator and natural external heating evaporator. Introduction: The externally heated natural circulation evaporator consists of four main parts: a circulation tube, a heating chamber,...
The natural external heating evaporator is an efficient evaporation system, whose main function is to condense the solutes in the liquid through evaporation, thereby achieving the separation and recovery of the liquid. The system adopts a circulating external heating method, which transfers heat to the evaporator through the heater, causing the liquid to evaporate and form steam inside the evaporator. The steam then condenses into liquid through the condenser, achieving liquid separation and...
External heating evaporator is also called Long-tube vertical evaporator. It is composed of heating chamber, evaporation separation chamber and circulating pipe, etc.The feed liquid enters the heating inner tube from the bottom of the heating chamber. The heating steam flows between the tubes, and the feed liquid boils in the tubes and quickly vaporizes. The flow rate of the secondary steam in the pipe is very high, 20-30m/s at normal pressure and 80-200m/s at decompression. It spirals up and...
Introduction of Industrial extraction tower equipment: Extraction tower machine is a kind of tower extraction equipment of mechanical stirring, it is composed by upper settling chamber, emulsion chamber and bottom settling chamber. the emulsion chamber is cylinder type, and is divided into several extraction chambers by static ring baffle, there is a fixed turnplate between two static ring baffles, and rotating with shaft together. When work, heavy phase(aqueous)and light phase(organic phase)...
Industrial distillation tower are large-scale chemical equipment mainly used for large-scale separation and purification processes in industrial production. It is usually composed of multiple distillation columns, capable of handling a large amount of mixture, and capable of continuous operation to improve production efficiency. Industrial distillation towers are widely used in industries such as petrochemical, pharmaceutical, food, and chemical fiber, and are one of the indispensable equipment...
Note 1. The high pressure stainless steel reactor should be placed indoors. When equipped with multiple high pressure stainless steel reactors, they should be placed separately. Each operation room should have an exit to the outdoor or passage, and...
High-pressure reactor all main parts kettle cover, kettle body, strong magnetic coupling stirrer, high temperature and high pressure needle valve, lower stirring part, inner cooling coil, temperature measurement part, liquid under the tube and other...
1. Check whether the equipment is damaged after opening the package. Install the equipment according to the structure of the equipment according to the model. The parts are checked according to the packing list to see if there are any missing parts....
Introduction to rolling surface processing of stainless steel tubes Stainless steel tube is an economic section of steel, is an important product in the steel industry, can be widely used in life decoration and industry, many people on the market...
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
