Yangzhou Tongyang Chemical Equipment Co., Ltd.
sunjiawei@yzcheequipt.com
86--18556139427
The reactor is a comprehensive reaction vessel. According to the reactionof reactor`s function and structure, it operate automatically once it has been previously set up, important parameters such as temperature, pressure, mechanical control (stirring, blowing, etc.) and reactant / product concentration were strictly controlled. Reactors are widely used in petroleum, chemical, rubber, pesticide, dyestuff, medicine, food and various research or experimental projects, It is used to complete hydrolysis, neutralization, crystallization, distillation, evaporation, storage, hydrogenation, alkylation, polymerization, condensation, heating, mixing and constant temperature reaction. The reaction kettle is composed of kettle body, kettle cover, jacket, agitator, transmission device
Product Usage: Pharmaceutical Crystallization Kettle Forced circulation evaporative crystallizer is a continuous crystallizer with crystal mud circulation. During operation, the feed liquid is fed from the bottom of the circulation pipe. After mixing with the crystallization slurry leaving the bottom of the crystallization chamber, it is pumped to the heating chamber. When the crystal paste is heated in the heating chamber (usually 2~6), no evaporation will occur. The hot crystalline paste...
Stable continuous evaporative crystallizer product features： 1. this equipment is mainly for targeted materials evaporation concentrate, And turn final product into a certain size of solid crystal. 2. When liquid material pass through circulation pump it heats up and direct into evaporation separator, it has a better result in vapor liquid separation. 3. Compact structure uses less area occupancy, stable performance etc 4. Easy to operate, easy maintenance. 5. It has sufficient mechanical...
The purpose of energy saving crystallization evaporator is to use secondary steam in evaporation process to save steam consumption to improve economic efficiency. The following chart is the amount of heating steam consumed by per kilogram of water, in which the actual consumption includes various heat losses during evaporation, its value changes slightly with different evaporator and evaporation process. Stable continuous evaporative crystallizer Product features： 1. this equipment is mainly...
The hydrogenation reaction kettle can be divided into two categories: One is the traditional stirred reactor. Gas in the upper space of the vessel can not be circulated in the liquid phase, because of the miscibility and density difference of the gas and liquid. The unreacted gas accumulates in the upper space of the reactor in the reactor, which seriously affects the reaction rate.The other is the reaction kettle in which the gas is circulated in the liquid phase. Gas-liquid reaction is a kind...
High-Performance Material Reactor consists of a set of special components to achieve transmission requirements and shear deformation, high gas internal circulation and turbulence.When motor rotates by driving internal hollow agitator the centrifugal force produced by the circular motion of the fluid nearby under the action of the impeller makes the agitator self-priming, when negative pressure zone is formed, inner part will connected to gas through air axis,Thus, the gas on liquid surface is...
Introduction to extraction tower machine: Stainless steel extraction tower is a mechanically stirred industrial extraction tower equipment, consisting of an upper settling chamber, an emulsification chamber, and a lower settling chamber. The emulsification chamber is cylindrical and divided into several extraction chambers through a static annular baffle. There is a fixed rotating disc between the two static annular baffles that rotate along the shaft. During operation, the heavy phase (aqueous...
Introduction of Industrial extraction tower equipment: Extraction tower machine is a kind of tower extraction equipment of mechanical stirring, it is composed by upper settling chamber, emulsion chamber and bottom settling chamber. the emulsion chamber is cylinder type, and is divided into several extraction chambers by static ring baffle, there is a fixed turnplate between two static ring baffles, and rotating with shaft together. When work, heavy phase(aqueous)and light phase(organic phase)...
Extraction tower configuration and Characteristics 1. The tower, the intermediate section of the extraction tower, is an upright cylinder. It can also be made of stainless steel or high borosilicate glass according to the size of the extraction. 2. the internal components and pipes of the extraction tower are made of stainless steel. 3. the extraction device is easy to clean and suitable for organic mixtures with high viscosity. Stainless steel extraction tower introduction: Extraction tower...
At present, it has been widely used in petroleum, chemical, rubber, food, scientific research and other industries to complete the process of differentiation, polymerization, condensation and other processes, as well as the reaction equipment of many other processes such as organic dyes. The reactor is a comprehensive reaction vessel. According to the reactionof reactor’s function and structure, it operate automatically once it has been previously set up, important parameters such as...
The structure of the packed extraction column is basically the same as the packed column used in the refinery and absorption. The tower is equipped with suitable packing, the light phase enters from the bottom and is discharged from the top; the heavy phase enters from the top and is discharged from the bottom. During the extraction operation, the continuous phase fills the entire column, the dispersed phase is dispersed into droplets by the distributor and enters the packing layer, and mass...
Product Usage: Crystallization Kettle Forced circulation evaporative crystallizer is a continuous crystallizer with crystal mud circulation. During operation, the feed liquid is fed from the bottom of the circulation pipe. After mixing with the crystallization slurry leaving the bottom of the crystallization chamber, it is pumped to the heating chamber. When the crystal paste is heated in the heating chamber (usually 2~6), no evaporation will occur. The hot crystalline paste enters the...
Industrial material reactor Anti-corrosion material reactor are most widely used in chemical plants, paint manufacturing, pharmaceutical industries, etc. These reactors are carefully fabricated to avoid any defects and any chemical reaction of surface materials, inlet and outlet flow, heating rate (heating rate) and cooling rate (cooling rate). High-performance material reactor are used for solid dissolution, product mixing, chemical reaction, batch distillation, crystallization, liquid/liquid...
Product Usage: Pharmaceutical Crystallization Kettle Forced circulation evaporative crystallizer is a continuous crystallizer with crystal mud circulation. During operation, the feed liquid is fed from the bottom of the circulation pipe. After mixing with the crystallization slurry leaving the bottom of the crystallization chamber, it is pumped to the heating chamber. When the crystal paste is heated in the heating chamber (usually 2~6), no evaporation will occur. The hot crystalline paste...
Stable continuous evaporative crystallizer product features： 1. this equipment is mainly for targeted materials evaporation concentrate, And turn final product into a certain size of solid crystal. 2. When liquid material pass through circulation pump it heats up and direct into evaporation separator, it has a better result in vapor liquid separation. 3. Compact structure uses less area occupancy, stable performance etc 4. Easy to operate, easy maintenance. 5. It has sufficient mechanical...
The hydrogenation reaction kettle can be divided into two categories: One is the traditional stirred reactor. Gas in the upper space of the vessel can not be circulated in the liquid phase, because of the miscibility and density difference of the gas and liquid. The unreacted gas accumulates in the upper space of the reactor in the reactor, which seriously affects the reaction rate.The other is the reaction kettle in which the gas is circulated in the liquid phase. Gas-liquid reaction is a kind...
High-Performance Material Reactor consists of a set of special components to achieve transmission requirements and shear deformation, high gas internal circulation and turbulence.When motor rotates by driving internal hollow agitator the centrifugal force produced by the circular motion of the fluid nearby under the action of the impeller makes the agitator self-priming, when negative pressure zone is formed, inner part will connected to gas through air axis,Thus, the gas on liquid surface is...
Introduction to extraction tower machine: Stainless steel extraction tower is a mechanically stirred industrial extraction tower equipment, consisting of an upper settling chamber, an emulsification chamber, and a lower settling chamber. The emulsification chamber is cylindrical and divided into several extraction chambers through a static annular baffle. There is a fixed rotating disc between the two static annular baffles that rotate along the shaft. During operation, the heavy phase (aqueous...
Introduction of Industrial extraction tower equipment: Extraction tower machine is a kind of tower extraction equipment of mechanical stirring, it is composed by upper settling chamber, emulsion chamber and bottom settling chamber. the emulsion chamber is cylinder type, and is divided into several extraction chambers by static ring baffle, there is a fixed turnplate between two static ring baffles, and rotating with shaft together. When work, heavy phase(aqueous)and light phase(organic phase)...
Extraction tower configuration and Characteristics 1. The tower, the intermediate section of the extraction tower, is an upright cylinder. It can also be made of stainless steel or high borosilicate glass according to the size of the extraction. 2. the internal components and pipes of the extraction tower are made of stainless steel. 3. the extraction device is easy to clean and suitable for organic mixtures with high viscosity. Stainless steel extraction tower introduction: Extraction tower...
At present, it has been widely used in petroleum, chemical, rubber, food, scientific research and other industries to complete the process of differentiation, polymerization, condensation and other processes, as well as the reaction equipment of many other processes such as organic dyes. The reactor is a comprehensive reaction vessel. According to the reactionof reactor’s function and structure, it operate automatically once it has been previously set up, important parameters such as...
1. Check whether the equipment is damaged after opening the package. Install the equipment according to the structure of the equipment according to the model. The parts are checked according to the packing list to see if there are any missing parts....
1. In the reaction of different media in the reaction kettle, first check whether the medium has corrosion to the main material. The reaction to the moment is intense, a large amount of gas or a high-temperature flammable and explosive chemical...
How to install and use the reactor 1. It should be installed on a firm and level workbench. The height of the workbench is determined according to the use conditions. There should be a certain space (≥360cm) around the equipment and the workbench...
Traditional chemical industries and high-value-added fine chemical industries must achieve sustainable development relying on the support of basic research and innovation in chemical engineering. In this field, the research group headed by Mao...
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
