Industrial Continuous Crystallizer

Product Usage: Pharmaceutical Crystallization Kettle Forced circulation evaporative crystallizer is a continuous crystallizer with crystal mud circulation. During operation, the feed liquid is fed from the bottom of the circulation pipe. After mixing with the crystallization slurry leaving the bottom of the crystallization chamber, it is pumped to the heating chamber. When the crystal paste is heated in the heating chamber (usually 2~6), no evaporation will occur. The hot crystalline paste...

Stable continuous evaporative crystallizer , also known as multi-effect evaporator, is suitable for sodium chloride, phenylpropanium acid, sodium sulfate, ammonium chloride, ammonium glycolic acid; barium chloride ,zinc sulfate, calcium chloride, ammonium, sodium hydroxide and other materials evaporation and crystallization. Stainless steel evaporative crystallizer product features： 1. this equipment is mainly for targeted materials evaporation concentrate, And turn final product into a certain...

Stable continuous evaporative crystallizer product features： 1. this equipment is mainly for targeted materials evaporation concentrate, And turn final product into a certain size of solid crystal. 2. When liquid material pass through circulation pump it heats up and direct into evaporation separator, it has a better result in vapor liquid separation. 3. Compact structure uses less area occupancy, stable performance etc 4. Easy to operate, easy maintenance. 5. It has sufficient mechanical...

The operation process of stable continuous evaporative crystallizer can be divided into countercurrent method, downstream method, cross flow method, and flat flow method. In addition to these four processes, other processes can also be arranged according to production conditions. For example, sometimes, in most evaporation processes, after introducing secondary steam and using it as heating steam, not every effect occurs. On the contrary, a portion of the secondary steam is used to preheat the...

The purpose of energy saving crystallization evaporator is to use secondary steam in evaporation process to save steam consumption to improve economic efficiency. The following chart is the amount of heating steam consumed by per kilogram of water, in which the actual consumption includes various heat losses during evaporation, its value changes slightly with different evaporator and evaporation process. Stable continuous evaporative crystallizer Product features： 1. this equipment is mainly...

Founded in 1990, TongYang is a professional company specializing in developing and manufacturing chemical machinery and equipment for customers ,It has manufacturing license of grade A2 (the third type of pressure vessel) issued by state general administration of quality supervision, inspection and quarantine, license Key: :TS2210D94-2015. Tongyang has always been committed to the research and development, production, application of chemical machinery and equipment in fine chemical,...

Scraper thin film evaporator application field: Thin film scraper evaporation system is widely used in heat interchange project. Particularly in Thermosensitive materials heat interchange, scraper are beneficial in heat interchange process, Through different design of scrapers, the distillation of complex products can be carried out. Quality result have been obtained for dissolution, stripping, reaction, degassing, deodorizing(gas) and so on. Medicine: antibiotics, sugar solution,...

The industrial falling film evaporation system is widely used in fields such as chemical, pharmaceutical, food, light industry, and environmental protection. Specific applications include: 1. Concentrated solution: The falling film evaporator can evaporate the water in the solution, thereby achieving the purpose of concentrating the solution. This method is applicable to industries such as pharmaceuticals, chemicals, and food. 2. Drying of thermosensitive substances: A falling film evaporator...

High efficiency tube heat exchanger is a commonly used heat exchange equipment, mainly composed of tube bundles, shells, tube plates, supports, seals, etc. The tube bundle is composed of many tubes, with a large heat conduction area and high thermal efficiency. The shell is the protective shell of the tube bundle, the support components are used to fix the tube bundle and the shell, and the sealing components are used to ensure the sealing performance of the heat exchanger. The advantages of...

Shell-and-tube heat exchangers are also known as tube-and-tube heat exchangers. The partition wall heat exchanger is a heat transfer surface which is closed on the wall surface of the tube bundle in the casing. The heat exchanger has a simple structure and reliable operation, can be manufactured by various structural materials (mainly metal materials), can be used under high temperature and high pressure, and is the most widely used type at present.OEM replacement plate and frame heat exchanger...

External heating evaporator have the advantages of simple manufacturing and convenient maintenance, making them one of the most widely used evaporators and the most typical type of evaporator in circulation evaporators. External heating circulating evaporator can be divided into new Circulation external heating evaporator and natural external heating evaporator. Introduction: The externally heated natural circulation evaporator consists of four main parts: a circulation tube, a heating chamber,...

Selection of multi effect evaporator: 1. Efficiency selection: mainly consider the size of the treatment capacity, the boiling point rise value of the steamed waste material, and the number of equipment. Multi effect operation is suitable for large treatment capacity; The more efficiency, the less steam consumption and the higher equipment investment; The higher the boiling point, the smaller the effective temperature difference and the smaller the effective number. 2. Selection of exhaust...

High efficient energy saving distillation tower is an equipment that can perform separation, purification, and other process operations in industries such as chemical, petroleum, pharmaceutical, and food. It has the characteristics of high separation efficiency, low energy consumption, and stable operation. Based on different classification methods, the following are several of them: 1. Classification of operating methods: high efficient distillation tower can be classified based on their...

Features of the absorption tower equipment: 1. Simple process, low cost, low running cost, easy installation. 2. Wide application range, high purification efficiency, low equipment resistance, small footprint 3. Long service life, convenient maintenance, simple operation and management, no special technical requirements. 4. According to different waste gases with different agents, the wet process is adopted to purify a variety of toxic and harmful waste gases 5. The desulfurization effect is...

Powder making drying tower suitable for powder, particle products from materials, such as,solution, emulsion, SC and pumpable paste states material. For this reason, when the particle size and distribution of the final product, their residual water contents, the stacking density and particle shape must meet the precision standard,Drying tower equipment is one of the most desired processes. High efficiency drying tower is a drying equipment with the characteristics of high efficiency, energy...

Drying tower equipment is a commonly used drying equipment, whose main function is to dry materials with high humidity through heating, ventilation, and other methods, in order to reduce humidity and improve quality. According to different drying principles and application fields, drying tower equipment can be divided into the following types: 1. Airflow drying tower: mainly used for drying granular and powdered materials, completing the drying process through the flow of hot air. 2. Rotary...

Industrial washing tower is a device used to remove pollutants from the air, usually used in industrial waste gas treatment. It is a kind of vertically mounted tower equipment, filled with adsorption materials, such as activated carbon, molecular sieve, waste gas through the tower body packing layer, and adsorption material contact, so as to remove pollutants. 1.The efficiency of dust removal and desulfurization is high and the efficiency of desulfurization can reach 85% when using alkaline...

Energy saving crystallization evaporator product features 1. This equipment is mainly used for the evaporation and concentration of target materials, and to convert the final product into solid crystals of a certain size. 2.When the liquid material passes through the circulation pump, it will be heated and directly enter the evaporation separator, thereby achieving better gas-liquid separation effect. 3. Compact structure, small footprint, stable performance, etc. 4. Easy to operate and...

The structure of the packed extraction column is basically the same as the packed column used in the refinery and absorption. The tower is equipped with suitable packing, the light phase enters from the bottom and is discharged from the top; the heavy phase enters from the top and is discharged from the bottom. During the extraction operation, the continuous phase fills the entire column, the dispersed phase is dispersed into droplets by the distributor and enters the packing layer, and mass...

The carbon steel tubular heat exchanger has a simple structure. The compact structure and simple shape make its manufacturing cost very low. It should be noted in all aspects of cleaning that the outside of the tube cannot be cleaned by machinery. This way of connecting the tube sheet to the tube bundle of the heat exchanger is relatively common. We generally weld the tube sheet and the shell and make a top cover. The welded top cover and the shell are attached with pipes for the purpose of...